If the motherboard in a PC fizzles, and a machine is valuable, you can get new parts see here
and perhaps redesign the unit simultaneously (contingent upon the model of the PC).
Finding a substitution board might be testing, busting a few web-based sell-off houses, and normal retailers stock OEM new parts or utilizing parts that are pulled from in any case harmed machines. Whenever you have acquired the motherboard, you can follow this manual for figuring out how to change it out for the bygone one.
Peruse the proprietor’s manual for the PC for explicit guidelines on eliminating parts like the optical drive and hard drive.
Detach the PC from its power line and eliminate the battery.
Close the top of the PC and put it topsy turvy on a spotless work surface.
Release any electricity produced via friction that might be available in your body by contacting a grounded metal surface.
Take out the screws and different latches that solid the optical drive and hard drive. Eliminate them from the PC and put them away.
Unscrew the memory access cover. (Allude to the manual for its area.)
Slacken the clasps that hold the memory contributes spot and lift out every module. Frequently, the memory chips are situated in similar region as the scaled down PCI remote card. The memory chips will be about around 50% of the size of the smaller than expected PCI card.
Detach the radio wire lead from the remote card, in the event that one is available. Discharge the clasps getting the card and eliminate it.
Open the processor access entryway, assuming there is one on the machine. In the event that the processor is removable, and one didn’t accompany the new motherboard, eliminate it and put it to the side in a protected spot.
Begin eliminating each of the screws in the lower part of the machine that keep the case intact. They are tiny, and they can without much of a stretch be stripped, so make certain to involve the accurately estimated screwdriver for the gig. Eliminate no screws that solid the LCD screen to the machine, except if vital.
Cautiously open the case. There might be covered up cuts that can tear assuming they are constrained open. On certain machines, they console might should be eliminated or lifted far removed.
Draw an image of the part areas prior to dismantling anything more. This will assist you with gathering the machine accurately after the task is finished.
Detach any wires that are associated with the motherboard. Turn off any cards, for example, the video card, that are not fabricated straightforwardly into the motherboard. Find the mounting screws for the motherboard and unscrew them.
Eliminate the old motherboard, mount the new unit and reassemble the parts backward request.